xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
181
802.1p Default Priority
The Switch allows the assignment of a default 802.1p priority to each port on the Switch. The priority tags are numbered from 0,
the lowest priority, to 7, the highest priority.
To view this window, click QoS > 802.1p Default Priority, as shown below:
Figure 4 - 6 802.1p Default Priority window
The user may adjust the following parameters:
Parameter Description
Unit
Use the pull-down menu to choose the switch unit from the switch stack.
From/To
Enter a port range by using the pull-down menus in the From and To fields.
To Next Page
Loading...
