xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
301
Errors
The Web Manager allows port error statistics compiled by the Switch's management agent to be viewed as either a line graph or a
table. Four windows are offered.
Received (RX)
To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu and then
select the port by using the Port pull-down menu. The user may also use the real-time graphic of the Switch and/or switch stack at
the top of the window by simply clicking on a port.
To view this window, click, Monitoring > Errors > Received (RX), as shown below:
Figure 7 - 13 Rx Error Analysis window (line graph)
To view the Received Error Packets Table window, click the link View Table, which will show the following table:
To Next Page
Loading...
