xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
312
RADIUS Authentication
This table contains information concerning the activity of the RADIUS authentication client on the client side of the RADIUS
authentication protocol.
To view this window, click Monitoring > Port Access Control > RADIUS Authentication, as shown below:
Figure 7 - 27 RADIUS Authentication information window
RADIUS Account Client
This window shows managed objects used for managing RADIUS accounting clients, and the current statistics associated with
them.
To view this window, click Monitoring > Port Access Control > RADIUS Account Client, as shown below:
Figure 7 - 28 RADIUS Account Client information
The user may also select the desired time interval to update the statistics, between 1s and 60s, where “s” stands for seconds. The
default value is one second. To clear the current statistics shown, click the Clear button in the top left hand corner.
The following information is displayed:
Parameter Description
InvalidServerAddresses
The number of RADIUS Accounting-Response packets received from unknown
addresses.
Identifier
The NAS-Identifier of the RADIUS accounting client. (This is not necessarily the
same as sysName in MIB II.)
ServerAddr
The (conceptual) table listing the RADIUS accounting servers with which the client
shares a secret.
ServerPortNumber
The UDP port the client is using to send requests to this server.
RoundTripTime
The time interval between the most recent Accounting-Response and the
Accounting-Request that matched it from this RADIUS accounting server.
Requests
The number of RADIUS Accounting-Request packets sent. This does not include
retransmissions.
Retransmissions
The number of RADIUS Accounting-Request packets retransmitted to this RADIUS
accounting server. Retransmissions include retries where the Identifier and Acct-
Delay have been updated, as well as those in which they remain the same.
Responses
The number of RADIUS packets received on the accounting port from this server.