xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
250
Figure 6 - 32 User Account Modify window
The following parameters can be configured:
Parameter Description
User Name
Enter a user name for the new account.
Password
Enter the password for the user. This field is case-sensitive and must be a complete
alphanumeric string.
Confirmation
Confirm the new password entered above. Entering a different password here from the one
set above will result in a fail message.
VLAN Name
Enter a VLAN to be associated with the WAC account.
VID(1-4094)
Enter the VLAN ID to be associated with the WAC account.
Click Apply to implement changes made.
WAC Host Table Settings
This window is used to enable and configure Web-based Access Control Host Table Settings on the Switch.
To view this window, click Security > Web Authentication > WAC Host Table Settings, as shown below:
To Next Page
Loading...
