xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
38
MAC Notification Settings
MAC Notification is used to monitor MAC
addresses learned and entered into the forwarding
database.
To view this window, click Administration >
MAC Notification Settings, as shown on the right.
Global Settings
The following parameters may be viewed and
modified:
Parameter Description
State
Enable or disable MAC
notification globally on the
Switch
Interval (sec)
The time in seconds
between notifications.
History size
The maximum number of
entries listed in the history
log used for notification. Up
to 500 entries can be
specified.
Port Settings
To change MAC notification settings for a port or
group of ports on the Switch, configure the
following parameters.
Parameter Description
Unit
Choose the switch in the
switch stack for which to
configure these settings.
From/To
Select a port or group of ports
to enable for MAC notification
using the pull-down menus.
State
Enable or disable MAC
Notification for the ports
selected using the pull-down
menu.
Click Apply to implement changes made.
Figure 2 - 32 MAC Notification Global Settings window
To Next Page
Loading...
Need help?
General