D-Link xStack User Manual

xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
244
Parameter Description
Succession
Choose the desired RADIUS server to configure: First, Second or Third.
RADIUS Server
Set the RADIUS server IP.
Authentic Port
Set the RADIUS authentic server(s) UDP port. The default port is 1812.
Accounting Port
Set the RADIUS account server(s) UDP port. The default port is 1813.
Key
Set the key the same as that of the RADIUS server.
Confirm Key
Confirm the shared key is the same as that of the RADIUS server.
Timeout(1-255)
Enter the timeout value in seconds (1 to 255). The default value is 5.
Retransmit(1-20)
Set the count for retransmit(1 to 20).The default value is 2.
Status
This allows the user to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled).
Click Apply to implement changes made.

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English