Right now, system does not support slow playback and backward playback
function.
You can follow the contents listed below for the operation instruction.
During instant playback interface:
System supports play, pause, exit and drag function.
In preview playback mode, system may shield current channel title and record
information. When you exit instant playback, you can view the channel title, record
information again.
During preview playback mode, system does not support split and switch function.
4.2.2.2 Digital zoom
It is to zoom in specified zone of current channel. It supports zoom in function in
multiple-channel mode. There are two ways for you to zoom in.
Click button , the button is shown as . Drag the mouse to select a zone, you can
zoom in the specified zone. You can drag in any direction you desire.
Put the mouse at the center of the zone you want to zoom in, and move the mouse,
you can zoom in the specified zone. You can drag in any direction you desire.
Right click mouse to cancel zoom and go back to the original interface.
4.2.2.3 Manual record function
It is to backup the video of current channel to the USB device. System cannot backup
the video of multiple-channel at the same time.
Click button , system begins recording. Click it again, system stops recoridng. You
can find the record file on the flash disk.
4.2.2.4 Manual Snapshot
Click to snapshot 1-5 times. The snapshot file is saved on the USB device or HDD.
You can go to the Search interface (chapter 4.9) to view.
4.2.2.5 Freeze
Click to freeze current video.
4.2.2.6 Mute (For analog channel only)
Click to mute. Click again to enable audio function when preview.
Please note this function is for one-window mode only.
4.2.2.7 Bidirectional talk (For camera connected via private protocol only)
If the connected front-end device supports bidirectional talk function, you can click this
button. Click button to start bidirectional talk function the icon now is shown as
. Now the rest bidirectional talk buttons of digital channel becomes null too.
Click again, you can cancel bidirectional talk and the bidirectional talk buttons of
other digital channels become as .
To Next Page
Loading...
