Step 5 Click Start button, system begins copy. At the same time, the backup button
becomes stop button. You can view the remaining time and process bar at the
left bottom. See Figure 4-108.
Figure 4-108
Note
During backup process, you can click ESC to exit current interface for other operation.
The system will not terminate backup process.
4.9.3 Smart Search Playback
Note
This function is for some series product only.
During playback process, it can analyze the motion detect zone in the scene and give
the analysis result.
This function is for channel that already enabled motion detect function (main
menu->Setting->Event->Video detect->Motion detect).
Step 1 Select a channel to playback video and then click . You can view the grids
on the playback video.
Note
This function is for one-channel playback mode.
If you are in multiple-channel playback mode, double click a channel first to
switch to one-channel playback mode.
Step 2 Left click mouse and then drag to select smart search zones(22*18（PAL）， 22*15
To Next Page
Loading...
