Dahua HCVR8204A-S3 - Playback

385
 Edit: Click it to edit start address and end address. See Figure 5-168. System can
check the IP address validity after the edit operation and implement IPv6 optimization.
 Default: Click it to restore default setup. In this case, the trusted sites and blocked
sites are both null.
Step 4 Click Save to complete setup.
 If you enabled trusted sites, only the IP in the trusted sites list can access the
device.
 If you enabled blocked sites, the IP in the blocked sites cannot access the
device.
Figure 5-167
Figure 5-168
5.8 Playback
Click Playback button, you can see an interface is shown as in Figure 5-169.