Dahua HCVR8204A-S3 - Search and Playback; Instant Playback; Search

129
you have enabled these two types at the same time, system can activate the activation
snapshot when an alarm occurs, and otherwise system just operates the schedule
snapshot.
4.8.2.4 Image FTP
In the main menu, from Setting->Network->FTP, you can set FTP server information.
Please enable FTP function and then click save button. See Figure 4-102.
Please boot up corresponding FTP server.
Please enable schedule snapshot (Chapter 4.8.2.1) or activation snapshot (Chapter
4.8.2.2) first, now system can upload the image file to the FTP server.
Figure 4-102
4.9 Search and Playback
It is to search and play corresponding file or image.
4.9.1 Instant Playback
Please refer to chapter 4.2.2.1 Instant playback for instant playback information.
4.9.2 Search
Click search button in the main menu, search interface is shown as below. See Figure
4-103.
Note
The following figure for reference only. Slight difference may be found on the user
interface.
Please input the
corresponding information
here, if you just upload the
image FTP.