Figure 4-50
When current channel is recording, system displays this icon.
When motion detection alarm occurs, system displays this icon.
When video loss alarm occurs, system displays this icon.
When current channel is in monitor lock status, system displays this
icon.
Tips
Preview drag: If you want to change position of channel 1 and channel 2 when you are
previewing, you can left click mouse in the channel 1 and then drag to channel 2,
release mouse you can switch channel 1 and channel 2 positions.
4.2.2 Preview Control
Move you mouse to the top center of the video of current channel, you can see system
pops up the preview control interface. See Figure 4-51 and Figure 4-52.
Note
If your mouse stays in this area for more than 6 seconds and has no operation, the
control bar automatically hides.
To Next Page
Loading...
