Click Backup to USB device to save detection result to the connected UDB device.
Figure 4-202
4.15.6 RAID
Note
RAID function is for some series product only.
The RAID (redundant array of independent disks) management can compost the
independent HDDs together to provide larger space as the logic HDD. It can enhance
system I/O performance, data usage and data security.
Note
Right now system supports RAID0/RAID1/RAID5/RAID10. Refer to chapter Appendix
RAID introduction for detailed information.
At least 3 HDDs. Usually we recommend 4 to 6 HDDs.
At least 4 HDDs. The amount shall be even number.
4.15.6.1 RAID Config
It is to create RAID manually or use one click to create RAID. Device needs to format HDD
after implement RAID operation.
To Next Page
Loading...
