Dahua HCVR8204A-S3 - Connection

144
4.11.2 Connection
It is to set port max amount and port value.
Step 1 From main menu->Setting->Network->Connection.
Enter setup interface. See Figure 4-118.
Step 2 Set parameters.
 Max connection: The max client login amount (such as WEB, platform, cellphone and
etc). The value ranges from 0 to 128(default).
 TCP port: Default value is 37777.
 UDP port: Default value is 37778.
 HTTP port: Default value is 80. If you are using the browser to access the device,
please add the corresponding port value if you have changed the default setup.
Check the Enable box to enable this function.
 HTTPS port: Default value is 443. Check the box to enable HTTPS function.
 RTSP port: Default value is 554.
 POS port: It is to transmit data. The value ranges from 1 to 65535. Default value is
38800.
Note
System needs to reboot after you changed and saved any setup of the above five ports.
Please make sure the port values here do not conflict.
Figure 4-118
Step 3 Click Apply or Save to complete setup.