Figure 4-157
Step 2 Select a channel number from the dropdown list and set the smart plan.
Step 3 Click Apply or Save to complete setup.
4.14.3 IVS (Optional)
Please contact your service engineer or local retailer if you cannot use IVS function.
Once any object violate the rule, the DVR can trigger an alarm and alert you as the
specified alarm mode.
Here you can set IVS rule. System can generate an alarm as the mode you previously set
once there is any object violates the rule
Step 1 From main menu->Setting->Event->IVS.
Enter IVS interface. See Figure 4-158.
To Next Page
Loading...
