4.19.3 Camera Upgrade
It is to update the network camera.
Step 1 From main menu->Setting->Camera->Upgrade.
Enter upgrade interface. See Figure 4-226.
Step 2 Click Browse button and then select the upgrade file.
Note
Insert the peripheral device than contain the upgrade file.
Step 3 Select a channel (or you can select device type filter to select several devices at
the same time.)
Step 4 Click Start upgrade button to update. You can see the corresponding dialogue
once the upgrade is finish. If the camera upgrade operation failed, please check
the camera connection.
Figure 4-226
4.20 Info
It is to view system information, event information, network information, log information
and etc.
4.20.1 System Info
It is to view HDD information, record information, bit stream information, version
information and etc.
4.20.1.1 HDD Information
It is to list HDD type, total space, free space, video start time and status. If connected to
the eSATA HDD, system can display the corresponding information here.
To Next Page
Loading...
