value is higher than the threshold you set here.
Figure 4-156
Step 5 Click OK to save threshold settings.
Enter diagnosis interface.
Step 6 Please refer to chapter 4.14.1.1 motion detection for detailed information
Step 7 Click Apply or Save to complete setup.
4.14.2 Smart Plan (Optional)
The smart plan is for the smart network camera. If you do not set a rule here, you
cannot use the intelligent functions in IVS (Chapter 4.14.3), Face detection (Chapter
4.14.4) and People counting (Chapter 4.14.4) when you are connecting to a smart
network camera.
In this interface, you can quickly add an intelligent rule for one preset. The intelligent rule
includes human face detection, behavior analytics and people counting.
Step 1 From main menu->Setting->Event->Smart plan.
Smart plan interface is shown as below. See Figure 4-157.
To Next Page
Loading...
