Step 3 Click Add and then input the parameters. Click OK button.
Step 4 Click Refresh to get the state as connected.
Step 5 From Setup->Storage->HDD manager, go to the HDD manager interface to view
iSCSI storage information.
5.7.5 Setting
5.7.5.1 General
The general interface includes general, date/time and holiday setup.
5.7.5.1.1 General
Step 1 From main menu->Setup->System->General->General.
Enter general interface. See Figure 5-131.
Figure 5-131
Step 2 Set parameters.
It is to set device name.
It is device channel number.
You can select the language from the dropdown list.
Please note the device needs to reboot to get the modification
activated.
This is to display video standard such as PAL.
Here is for you to select working mode when hard disk is full. There are two
options: stop recording or rewrite. If current working HDD is overwritten or
the current HDD is full while the next HDD is no empty, then system stops
recording, If the current HDD is full and then next HDD is not empty, then
system overwrites the previous files.
Here is for you to specify record duration. There are two ways for you to set.
Time length: It is to pack according to time. The value ranges from 1 to
60 minutes. Default value is 60 minutes.
File length: It is to pack according to file length. The default setup is
1024M. The value ranges from 128M to 2048M.
To Next Page
Loading...
