（NTSC）).
Step 3 Click to go to smart search and playback. System is going to playback all
motion detect record footages.
Step 4 Click again to stop smart search function.
4.9.4 Mark Playback
When you are playback record, you can mark the record when there is important
information. After playback, you can use time or the mark key words to search
corresponding record and then play. It is very easy for you to get the important video
information.
Add Mark
Step 1 When system is playback, click Mark button .
Enter add mark interface. See Figure 4-109.
Figure 4-109
Step 2 Input mark name and then click OK button.
System displays file name on mark file list.
Playback Mark
During 1-window playback mode, click mark file list button in Figure 4-103. Enter
mark file list interface. Double click one mark file, you can begin playback from the mark
time.
Play before mark time
It is to set to begin playback from previous N seconds of the mark time.
Note
Usually, system can playback previous N seconds record if there is such kind of record file.
Otherwise, system playbacks from the previous X seconds when there is such as kind of
record.
Mark Manager
To Next Page
Loading...
