Dahua HCVR8204A-S3 - Register

157
Figure 4-129
4.11.12 Register
This function allows the device to auto register to the proxy you specified. In this way, you
can use the client-end to access the DVR and etc via the proxy. Here the proxy has a
switch function. In the network service, device supports the server address of IPv4 or
domain.
Step 1 From main menu->Setting->Network->Register.
Enter register interface. See Figure 4-130.
Step 2 Set parameters.
 Enable: Check the box to enable auto register function.
 Server IP address: The server IP address or server domain name you want to
register.
 Port: The auto registration port value of the server.
 Sub-device ID：The device ID allocated by the server.