Dahua HCVR8204A-S3 - Right-Click Menu

91
4.2.2.8 Registration (For digital channel only)
It is a shortcut menu. Click it to go to the Registration interface to add/delete remote
device or view its corresponding information. Please refer to chapter 4.1.4.4 for
detailed information.
4.2.3 Right-Click Menu
On the preview interface, right click mouse, you can view menu interface shown as in
Figure 4-53.
Note
After you go to the corresponding interface, right click mouse to go back to the
upper-level.
 Window split mode: You can select window amount and then select channels.
 Previous screen/next screen: Click it to go to the previous screen/next screen. For
example, if you are using 4-split mode, the first screen is displaying the channel 1-4,
click Next screen, you can view channel 5-8.
 PTZ: Click it to go to PTZ interface. For detailed operation information, please refer to
chapter 4.6.
 Fisheye: It is to set fisheye installation mode and display mode. For detailed
operation information, please refer to chapter 4.4.
 Smart track: It is to view the smart track image. For detailed operation information,
please refer to chapter 4.14.7.
 Auto focus: Please make sure you connected network camera supports this function.
For detailed operation information, please refer to chapter 4.2.6.
 Color setting: Set video corresponding information. For detailed operation information,
please refer to chapter 4.2.5.
 Image: Set camera video parameters. For detailed operation information, please refer
to chapter4.16.1.
 Display: Set video output rate. For detailed operation information, please refer to
chapter 4.2.8.1.
 Sub port: Click it to switch to HDMI2 port.
 Search: Click it to go to Search interface to search and playback a record file. For
detailed operation information, please refer to chapter 4.9.
 Face search: It is to display human face list and view human face record. For detailed
operation information, please refer to chapter 4.3.
 Record control: Enable/disable record/snapshot channel. For detailed operation
information, please refer to chapter 4.8.
 Alarm output: Enable/disable alarm output function. For detailed operation
information, please refer to chapter 4.14.10.
 Camera registration: Click it to go to registration interface. Here you can search and
add remote device. For detailed operation information, please refer to chapter
4.1.4.4.
 Video matrix: Set video matrix tour channel and interval. For detailed operation
information, please refer to chapter 4.2.9.2.