Dahua HCVR8204A-S3 - Information; Version

397
Note
Differen series products may support different alarm types. The following figure for
reference only.
Click alarm function, you can see an interface is shown as Figure 5-188.
Here you can set device alarm type and alarm sound setup (Please make sure you have
enabled audio function of corresponding alarm events.).
Figure 5-188
Please refer to the following sheet for detailed information.
Type
Parameter
Function
Alarm
Type
Video loss
System alarms when video loss occurs.
Motion detection
System alarms when motion detection alarm
occurs.
Tampering
System alarms when camera is viciously masking.
Disk full
System alarms when disk is full.
Disk error
System alarms when disk error occurs.
External alarm
Alarm input device sends out alarm.
Intelligent alarm
The IVS rule you set in smart plan can trigger
intelligent alarm.
Operation
Prompt
Check the box here, system can automatically pops
up an alarm icon on the Alarm button in the main
interface when there is an alarm.
Alarm
Sound
Play alarm
sound
System sends out alarm sound when an alarm
occurs. You can specify as you wish.
Sound path
Here you can specify alarm sound file.
5.10 Information
5.10.1 Version
It is to view record channel, alarm input/output information, software version, release date
and etc.
Note
The following figure for reference only.
From main menu->Info->Version, the version interface is shown as in Figure 5-189.