Figure 4-130
Step 3 Click Apply or Save to complete setup.
4.11.13 Alarm Center
It is to set alarm center server. Once there is an alarm event, system can send out the
alarm to the alarm center. Please refer to chapter 4.14 Alarm events to set upload
function.
Step 1 From main menu->Setting->Network->Alarm center.
Enter alarm center interface. See Figure 4-131.
Step 2 Set parameters.
Enable: Check the box to enable alarm center function.
Host IP/Port: The IP address and the communication port of the PC that have
installed the alarm client.
Self-report time: Select alarm upload time from the dropdown list.
To Next Page
Loading...
