Figure 4-57
4.2.8 Preview and Display
It is to display preview video effect including image display mode, OSD and etc.
4.2.8.1 Display Output
On the preview interface, right click mouse and then select video output mode, there are
two options: full screen (4:3) and original scale 16:9). Current output mode is checked
by . See Figure 4-58.
Figure 4-58
4.2.8.2 Display Effect
It is to enable/disable time title, channel title display and set menu transparency.
Step 1 From main menu->Setting->System->Display->Display.
Display setup interface is shown as below. See Figure 4-59.
Step 2 Set parameters.
Time display: You can select to display time or not when system is playback.
Channel display: You can select to display channel name or not when system is
playback.
Original rate: Check the box here, the video can be displayed at its actual size.
IVS rule preview: Check the box here, you can view IVS rule name on the preview
window.
POS info: Check the box here; you can view POS information on the preview window.
Note
Make sure the POS function is on.
Transparency: Here is for you to adjust menu transparency. The higher the value is,
the more transparent the menu is.
Screen enable: It is to set video output port.
Screen 1: It refers to the screen connected to the VGA or the HDMI port. The video
source is the same.
To Next Page
Loading...
