Screen 2: It refers to the screen connected to the HDMI2 port. Check the box here to
view the video from the network work camera; otherwise, it only displays the video
from the analog camera.
Screen No.: Select a screen from the dropdown list and then you can set resolution.
Resolution: It is to set DVR resolution.
System supports the following resolutions: 1920×1080, 1280×1024, 1280×720,
1024×768, 2560×1440, 3840×2160@25fps, 3840×2160@30fps.
The default VGA/ HDMI1/HDMI2 resolution is 1280×1024.
Please note the system needs to reboot to activate new setup.
Note
Right now, HDMI2 does not support 2560×1440, 3840×2160@25fps, 3840×
2160@30fps.
Preview mode: Please select preview mode from the dropdown list. It includes two
options:
General: There is no information on the preview window.
Human face: System displays human face information on the right pane of the
preview window.
Figure 4-59
Step 3 Click Apply or Save to complete setup.
4.2.8.3 TV Adjust
It is to adjust video output effect of the VIDEO OUT port.
Step 1 From main menu->Setting->System->Display->TV Adjust.
To Next Page
Loading...
