It is to change channel name. Please note for digital channel, you can only modify the
channel name of the connected network camera.
Step 1 From main menu->Setting->Camera->CAM name.
Enter channel name interface. See Figure 4-210.
Figure 4-210
Step 2 Input new channel name.
Step 3 Click Apply or Save to complete setup.
4.16.3 Channel Type
Note
Please note this function is for some series product only. Slight different maybe found on
the user interface.
From main menu->Setting->Camera->Channel type, the interface is shown as below. See
Figure 4-211 or Figure 4-212. It is to set channel type.
To Next Page
Loading...
