Figure 4-131
Step 3 Click Apply or Save to complete setup.
4.11.14 P2P
You can use cellphone client or the management platform to access the device.
You can use your cell phone to scan the QR code and add it to the cell phone client.
Via the SN from scanning the QR code, you can access the device in the WAN.
Please refer to the P2P operation manual included in the resources CD.
From main menu->Setting->Network->P2P, you can go to the following interface, the P2P
interface is shown as in Figure 4-132.
Refer to chapter 4.1.4.3 P2P for detailed information.
To Next Page
Loading...
