Check the corresponding box to select record type. See Figure 5-173.
Figure 5-173
POS
In one-window playback mode, click you can hide or display POS information.
File clip
It is to clip some footages to save in the USB device or peripheral device. The interface is
shown as in Figure 5-174.
Figure 5-174
Step 1 Select a file first and then click to playback.
Step 2 Click and there are two ways for you to set start time and end time See
Figure 5-175.
Input start time and end time at the text column.
Drag the two triangles icons at the time bar to set start time and end time.
Figure 5-175
Step 3 Click to save the file.
The file will be saved at the path you set in chaptet 5.7.1.3.4 (main
menu->Setup->Camera->Encode->Path).
Note
Clip function is for one-channel mode.
5.8.2 Mark Playback
Please make sure your purchased device support this function. You can use this
function only if you can see the mark playback icon on the Search interface.
When you are playback record, you can mark the record when there is important
information. After playback, you can use time or the mark key words to search
corresponding record and then play. It is very easy for you to get the important video
information.
Add Mark
To Next Page
Loading...
