Dahua HCVR8204A-S3 - Set PTZ Functions

112
Figure 4-75
 Mode 2: For all HDCVI cameras.
Click , you can view menu operation interface. See Figure 4-76. Click the Enter
button; you can see the OSD menu of the HDCVI camera. See Figure 4-75. Use direction
buttons to select the parameters and click the “OK” to confirm.
Figure 4-76
Note
Coaxial cable control is not for all cameras. Please check before the operation.
4.6.4 Set PTZ Functions
In Figure 4-72, click to open the menu, you can set preset, tour, pattern, scan and
etc. See Figure 4-77.