Figure 4-61
Step 4 Click Apply or Save to complete setup.
If this function is disabled, you cannot operate zero-channel encoding function at the WEB,
the video is black or null even you operate when the function is disabled. After you
enabled this function, login the Web and you can select zero-channel encoding mode at
the right corner of the interface . Select a mode; you can
view the local preview video.
4.2.9 Tour
It is to view multiple-channel video at the specified interval on the preview window.
4.2.9.1 Tour Settings
It is to set tour mode, tour channel and interval.
Step 1 From main menu->Setting->System->Display->Tour.
Enter tour interface. See Figure 4-62.
Step 2 Set parameters.
Enable tour: Highlight box here to enable this function.
Screen No.: It is to select the screen you want to enable tour function.
Interval: System supports 1/8/-window tour. Input proper interval value here. The
value ranges from 5-120 seconds. It is for schedule tour/alarm/motion detect tour.
Split: You can select window split mode from the dropdown list.
Channel group: It is to display all channel groups on current split mode. You can edit
and delete a channel group here. Double click an item in the list; you can edit its
channel group setup. Right now system max supports 64.
To Next Page
Loading...
