Figure 5-72
5.7.3 Event
CAUTION
For the channel connected to the analog fisheye, the intelligent function is null. Please
refer to the interface of your purchased product for detailed information.
5.7.3.1 Video detect
The video detect includes motion detect, video loss, tampering, scene change and
diagnosis.
5.7.3.1.1 Motion Detect
After analysis video, system can generate a video loss alarm when the detected moving
signal reached the sensitivity you set here.
Step 1 From main window->Setup->Event->Video detect->Motion detect.
Enter motion detect interface. See Figure 5-73.
To Next Page
Loading...
