You can use cellphone client or the management platform to access the device.
You can use your cell phone to scan the QR code and add it to the cell phone client.
Via the SN from scanning the QR code, you can access the device in the WAN.
Please refer to the P2P operation manual included in the resources CD.
Step 1 From main menu->Setup->Network->P2P.
Enter P2P interface. See Figure 5-71.
Figure 5-71
Here we use cell phone APP to continue.
Step 2 Use cell phone to scan the QR code and download the APP.
Step 3 After installation, run the APP and Live Preview, enter the main interface. Now
you can add device to the APP.
1. Open App; tap to go to the Live preview.
2. Tap at the top left corner, you can see the main menu.
3. Tap Device manager button, you can use several modes (P2P/DDNS/IP and
etc) to add the device. Click to save current setup. Tap Start Live
preview to view all-channel video from the connected device. See Figure
5-72.
To Next Page
Loading...
