Dahua HCVR8204A-S3 - Remote Device Manager; Connection Status

242
Figure 4-223
4.19 Remote Device Manager
It is to view remote device running status and upgrade the network camera.
4.19.1 Connection Status
It is to view the status of the corresponding network camera channel such as motion
detect, video loss, tampering, alarm and etc.
From main menu->Setting->Camera->Remote->Status, enter status interface. See Figure
4-224..
 IPC status: : Front-end does not support. : Front-end supports. :
There is alarm event from current front-end.
 Connection status: : Connection succeeded. : Connection failed.
 Refresh: Click it to get latest front-end channel status.