Click the to delete the hotspare disk.
4.15.7 iSCSI
Note
iSCSI function is for some series product only.
Comparing with traditional HDD storage, iSCSI has large storage space and is easy to
manage.
You can set the network mapping HDD so that device can storage audio/video on the
network HDD.
Step 1 From Main menu->Setting->Storage->iSCSI.
Enter iSCSI interface. See Figure 4-207.
Step 2 Set parameters.
Server IP address: It is to input iSCSI server IP address.
Port: It is to input iSCSI server port value. The default setup is 3260.
User name/password: It is to input iSCSI server user name and password. Check the
Anonymous button if it supports anonymous login.
Set path: You can click the Set path button to select the remote storage path. Please
note each path here stands for one iSCSI share disk. The path has been generated
when it is created at the server.
Add: After you input the above information, click add button to add the new
information to the list.
Figure 4-207
To Next Page
Loading...
