Dahua HCVR8204A-S3 - Alarm Events; Video Detect

171
Figure 4-146
4.14 Alarm Events
CAUTION
For the channel connected to the analog fisheye, the intelligent function is null. Please
refer to the interface of your purchased product for detailed information.
4.14.1 Video Detect
Video detect includes motion detect, video loss, tampering, scene changing,
diagnosis.
4.14.1.1 Motion Detect
After analysis video, system can generate a video loss alarm when the detected moving
signal reached the sensitivity you set here.
Step 1 From main menu->Setting->Event->Video detect->Motion Detect.
Enter motion detect interface. See Figure 4-147.
Step 2 Set parameters.
 Event type: From the dropdown list you can select motion detection type.
 Channel: Select a channel from the dropdown list to set motion detect function.
 Enable: Check the box here to enable motion detect function.
 Enable PIR: The PIR function is enabled by default if the connected remote device
supports the PIR function. When the PIR function is on, motion detection function is