Figure 4-121
Step 2 Check the box to enable this function. Input PPPoE name and PPPoE password.
Step 3 Click Apply or Save to complete setup.
DVR needs to reboot to activate new setup. After rebooting, DVR will connect to
internet automatically. The IP in the PPPoE is the DVR dynamic value. You can
access this IP to visit the device.
Note
After enable PPPoE function, the IP address in the main
menu->Setting->Network->TCP/IP is read-only.
4.11.6 DDNS
DDNS(Dynamic Domain Name Server) is to dynamically refresh the DNS domain name
and IP address if the device IP address has changed frequently. The user can use the
domain to access the device.
Preparation
Before the operation, make sure the device supports DNS type and go to the DDNS
service provider website to register the domain name via the PC.
If the DDNS type is Dahua DDNS, there is no need to register DDNS.
If the DDNS type is not Dahua DDNS, please go to the corresponding DDNS website
to register user name, password, domain name and etc.
Note
To Next Page
Loading...
