After you successfully registered and logged in the DDNS website, you can view all
connected device information of current login user.
Step 1 From main menu->Setting->Network->DDNS.
Enter DDNS setup interface. See Figure 4-122.
Figure 4-122
Step 2 Check the box to enable DDNS function and then input corresponding
parameters.
If the DDNS type is Dahua DDNS:
DDNS type: CN99 DDNS, NO-IP DDNS, Dahua DDNS, Dyndns DDNS and
sysdns DDNS.
Address: For Dahua DDNS, the default address is www.dahuaddns.com. It
is read-only.
Domain Mode：There are two modes: Default domain name and custom
domain name. The default domain name is MAC address dahuaddns.com.
The custom domain name is to input customized settings. The default
domain name is name.dahuaddns.com.
Email: Input email address when accessing DDNS server provider.
Test: After setting, click it to check the domain registration is OK or not. Go
to the next step is the test is OK. Check the network connection if the test
fails.
If the DDNS type is not Dahua DDNS:
Type/address:
To Next Page
Loading...
