It is to display human face detection file list. The latest file is at the
bottom.
Click Export, you can export the selected file to the USB device.
There are two types: image/record.
Image: Export the recognized human face image.
Record: Export the record file before and after 10 seconds
when the DVR recognizes the human face.
Play the searched record file or image. Double click the file or click
button to playback.
Set date, start time and end time, click Search button, you can view the
corresponding file list.
4.4 Fisheye
4.4.1 Fisheye De-Warp During Preview Interface
On the preview interface, select fisheye channel and then right click mouse, you can
select fisheye. Now you can see an interface shown as in Figure 5-71. You can set fisheye
installation mode and display mode.
Note
For the non-fisheye channel, system pops up dialogue box to remind you it is not a
fisheye channel and does not support de-warp function.
If system resources are insufficient, system pops up the corresponding dialogue box
too.
180°fisheye supports wall mount de-warp mode.
Figure 4-67
To Next Page
Loading...
