Step 2 Set parameters.
Check Preview or Monitor first.
Click Set button, you can privacy mask the specified video in the
preview or monitor video.
System max supports 4 privacy mask zones.
You can enable this function so that system overlays time
information in video window.
You can use the mouse to drag the time title position.
You can view time title on the live video of the WEB or the
playback video.
You can enable this function so that system overlays channel
information in video window.
You can use the mouse to drag the channel title position.
You can view channel title on the live video of the WEB or the
playback video.
Step 3 Click Save to complete the setup.
5.7.1.3.4 Path
From main window->Setup->Camera->Encode->Path, the storage path interface is shown
as in Figure 5-40.
Here you can set snap image saved path ( in the preview interface) and the record
storage path ( in the preview interface).The default setup is C:\PictureDownload
and C:\RecordDownload.
Please click the Save button to save current setup.
Figure 5-40
5.7.1.4 Channel Name
Please note this function is for analog channel only. The offline digital channel name here
is read-only.
Step 1 From main window->Setup->Camera->Camera name.
Enter channel name. See Figure 5-41.
To Next Page
Loading...
