Figure 5-38
Step 2 Set parameters.
There are two modes: Regular (schedule) and Trigger.
Regular snapshot is valid during the specified period you
set.
Trigger snapshot only is valid when motion detect alarm,
tampering alarm or local activation alarm occurs.
It is the same with the resolution of the main stream.
It is to set the image quality. There are six levels.
It is to set snapshot frequency. The value ranges from 1s to 7s.
Or you can set customized value. The max setup is
3600s/picture.
Click it; you can copy current channel setup to other channel(s).
Step 3 Click Save to complete the setup.
5.7.1.3.3 Video Overlay
Step 1 From main window->Setup->Camera->Encode->Overlay.
Enter video overlay interface. See Figure 5-39.
Figure 5-39
To Next Page
Loading...
