device amount has reached the threshold. In this situation, please set multicast IP to use
multicast protocol to access.
Step 1 From main menu->Setting->Network->Multicast.
Enter multicast interface. See Figure 4-128.
Step 2 Set parameters.
Enable: Check the box here to enable multicast function.
IP address: The multicast IP address (0.0.0.0～255.255.255.255).
Port: The multicast port value(1025～65000).
Figure 4-128
Step 3 Click Apply or Save to complete setup.
Use WEB to login, you can see the following interface. See Figure 4-132. Select login type
as the Multicast from the dropdown list. After you logged in the Web, the Web can
automatically get multiple cast address and add it to the multiple cast groups. You can
enable real-time monitor function to view the video.
To Next Page
Loading...
