The type includes two options:
Global: It is global hotspare disk. When any RAID becomes degrading, it can replace
and build the RAID.
Local: It is local hotspare disk. When the specified RAID becomes degrading, it can
replace and build the RAID.
Step 3 Click OK to complete hotspare disk setting.
Note
Click the to delete the hotspare disk.
5.7.4.9 iSCSI
Note
iSCSI function is for some series product only.
Comparing with traditional HDD storage, iSCSI has large storage space and is easy to
manage.
You can set the network mapping HDD so that device can storage audio/video on the
network HDD.
Step 1 From main menu->Setup->Storage->iSCSI.
Enter iSCSI interface. See Figure 5-130.
Figure 5-130
Step 2 Set parameters.
It is to input iSCSI server IP address.
It is to input iSCSI server port value. The default setup is 3260.
It is to input iSCSI server user name and password. Check the
Anonymous button if it supports anonymous login.
You can click the Set path button to select the remote storage path.
Please note each path here stands for one iSCSI share disk. The path
has been generated when it is created at the server.
To Next Page
Loading...
