3. Click OK button to complete the operation.
5.7.4.8.2 RAID Info
It is to display RAID name, space, type, member HDD, hotspare HDD, status and etc.
From main menu->Setup->Storage->RAID->RAID info, you can go to the following
interface. See Figure 5-127.
Figure 5-127
5.7.4.8.3 Hotspare disks
In this interface you can add/delete hotspare HDD if you have set RAID.
Step 1 From main menu->Setup->Storage->RAID->Hotspare.
Enter hotspare interface. See Figure 5-128.
Figure 5-128
Step 2 Click to set corresponding disk to the hotspare disk. See Figure 5-129.
Figure 5-129
To Next Page
Loading...
