Here is for you to set auto logout interval once login user remains inactive
for a specified time. Value ranges from 0 to 60 minutes.
You can input an interval here to synchronize the DVR time and IPC time.
Check the box here, system displays the navigation bar on the interface.
Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login
interface.
Step 3 Click Save to complete the setup.
5.7.5.1.2 Date and time
Step 1 From main menu->Setup->System->General->Date and time.
Enter date and time interface. See Figure 5-132.
Figure 5-132
Step 2 Set parameters.
Here you can select date format from the dropdown list.
There are two options: 24-H and 12-H.
The time zone of the device.
It is to set system time. It becomes valid after you set.
You can click this button to save the system time as your PC current time.
Here you can set day night save time begin time and end time. You can set
according to the date format or according to the week format.
To Next Page
Loading...
