Figure 4-56
Please refer to the following sheet for detailed information.
Please select according to your actual situation. There are two
options:PAL/NTSC.
It is to set video resolution: 720P@25,
720P@30,1080P@25,1080P@30,4MP@25,4MP@30,4K@12,4K@15,
4M@25,4M@30.
Note
The loop device supports
4MP@25,4MP@30,4K@12,4K@15,4M@25,4M@30.
It is to adjust monitor window bright. The default value is 7.
The larger the number, the bright the video is. When you input the value
here, the bright section and the dark section of the video will be adjusted
accordingly. You can use this function when the whole video is too dark
or too bright. Please note the video may become hazy if the value is too
high. The recommended value ranges from 0 to 15.
To Next Page
Loading...
