Figure 4-173
2. Select fisheye channel and PTZ camera channel, set monitor position name
and set parameters.
Type: Here you can select smart track mode. It includes: 1 fisheye+1
PTZ camera/1 fisheye+2 PTZ cameras/1 fisheye+3 PTZ cameras.
Monitor name: It is the monitor position. Input customized monitor
position name.
Main channel: Click Select button and then select fisheye from the
dialogue box. Click Ok button, you can view the channel number and
channel name.
PTZ camera: Click Select button and then select corresponding PTZ
camera amount from the dialogue box. Click Ok button, you can view
PTZ camera channel number, channel name and IP address.
3. Click OK button.
Monitor position settings are complete. See Figure 4-172.
Step 3 Set calibration, set fisheye and PTZ camera relationship.
1. Click or double click the monitor line you just added.
Enter calibration interface. See Figure 4-174.
To Next Page
Loading...
