Step 2 Select the directory and then click the OK button.
System pops up a dialogue box to remind you successfully exported.
Step 3 Please click OK button to exit.
Note
The exported file extension name is .CVS. The file information includes IP address, port,
remote channel number, manufacturer, user name and password.
5.7.1.1.7 IP Import
Import IP address to add the camera.
Step 1 Click Import button.
Enter Browse interface.
Step 2 Select the import file and then click the OK button.
System pops up a dialogue box to remind you successfully exported.
Note
If the imported IP has conflicted with current added device, system pops up a
dialogue box to remind you. You have two options:
OK: Click OK button, system uses the imported setup to overlay current one.
Cancel: Click Cancel button, system adds the new IP setup.
Step 3 Please click OK button to exit.
CAUTION
You can edit the exported .CVS file. Do not change the file format; otherwise it
may result in import failure.
Does not support customized protocol import and export.
The import and export device shall have the same language format.
5.7.1.2 Conditions
It is to view device property information. The setups become valid immediately after you
set.
Note
Slight difference may found on the user interface. The following figure for reference only.
Step 1 From main window->Setup->Camera->Image.
Enter condition interface. The analog channel is shown as in Figure 5-35. The
digital channel is shown as in Figure 5-36.
To Next Page
Loading...
