It is to set the white balance mode. It has effect on the general hue of the
video. This function is on by default. You can select the different scene
mode such as auto, sunny, cloudy, home, office, night, disable and etc to
adjust the video to the best quality.
Auto: The auto white balance is on. System can auto compensate the
color temperature to make sure the vide color is proper.
Sunny: The threshold of the white balance is in the sunny mode.
Night: The threshold of the white balance is in the night mode.
Customized: You can set the gain of the red/blue channel. The value
reneges from 0 to 100.
It is to set device color and the B/W mode switch. The default setup is auto.
Color: Device outputs the color video.
Auto: Device auto select to output the color or the B/W video according
to the device feature (The general bright of the video or there is IR light
or not.)
B/W: The device outputs the black and white video.
Sensor: It is to set when there is peripheral connected IR light.
Step 3 Click Save to complete the setup.
5.7.1.3 Encode
It includes encode setup, snapshot setup, video overlay and storage path setup.
5.7.1.3.1 Encode
Step 1 From main window->Setup->Camera->Encode->Encode.
Enter encode interface. See Figure 5-37.
To Next Page
Loading...
