It is to select working mode when hard disk is full. There are two options:
stop recording or rewrite.
Stop: If current HDD is full while there is no idle HDD, then system
stops recording,
Overwrite: If the current HDD is full while there is no idle HDD, then
system overwrites the previous files.
Note
DVR does not overwrite the locked files. Please refer to chapter 5.8.9 to
lock or unlock a file.
It is to specify record duration. There are two ways for you to set.
Time length: It is to pack according to time. The value ranges from 1
to 60 minutes. Default value is 60 minutes.
File length: It is to pack according to file length. The default setup is
1024M. The value ranges from 128M to 2048M.
Never: Do not auto delete old files.
Customized: input customized period here, system can auto delete
corresponding old files
Here you can view alarm output port status. The alarm is enabled if the
icon is highlighted.
Click the button, you can clear all alarm output status.
5.7.4.2 Schedule
It is to set record and snapshot plan. Different channels and different dates can set
different record/snapshot periods. There are six periods in one day.
5.7.4.2.1 Schedule Record
Step 1 From main menu->Setup->Storage->schedule->Record.
Enter record setup. See Figure 5-114.
To Next Page
Loading...
