④ Connect the other end of the
HDD cable to the mainboard.
⑤Connect the power cable to the
HDD.
⑥Put the cover back and fix the
screws to secure firmly.
Important:
If the HDD amount is less than four, you do not need to install the HDD bracket.
When there is a bracket, please make sure the installation direction of HDDs is the same.
3.3.2.4 The Removable Front Panel 2U Series
The removable front panel 2U series includes HCVR88XXS-URH-S3.
This series DVR max supports 8 SATA HDDs. Please use HDD of 7200rpm or higher.
○
1 Turn the key into the hole
in the front panel.
○
3 Put the HDD to the slot and
adjust the handle to secure it.
.
○
4 Put the front panel back
and use the key to fix
firmly.
HDD Handle Installation
○
1 Turn the key into the hole in the
front panel.
To Next Page
Loading...
