You can click other items to view information conveniently. For the network device
already added to the device, you can see there is a small icon “*” after the SN in case
there is repeatedly add operation.
Add: Click it to connect to the selected device and add it to the Added device list.
Support Batch add.
Edit: Click button or double click a device in the list, you can change channel
setup.
Delete: Please select one device in the Added device list and then click to
remove.
Organize videos: Click to set channel sequence. Click Move up or Move down to set.
Refer to chapter 4.1.4.4.4 Organize videos for detailed information.
Export: Export the added device list to the USB device. Refer to chapter 4.1.4.4.7
Export for detailed information.
Import: Click to add several devices at the same time. Refer to chapter 4.1.4.4.8
Import for detailed information.
Figure 4-22
4.1.4.4.1 Initialize Camera
The initialize function in registration interface is to change connected camera login
password and IP address.
Steps:
Step 1 From main menu->Setting->Camera->Registration.
To Next Page
Loading...
